SMK QB78, XS78, QB79, TH78, XS79 CO2 replacement exhaust (main) valve Modified Exhaust Valve
[smk Modified Exhaust Valve]
£16.96p

SMK QB78, XS78, QB79, TH78, XS79 CO2 replacement exhaust (main) valve Modified Exhaust Valve

Our Modified Exhaust Valve designed for more power, for the SMK QB/XS/TH 78/79 models.
Ours have a Stainless Steel shaft rather than the standard mild steel one.
Also comes with the seal already to be fitted.
The exhaust valve will unscrew so you can change the seal.
The standard one is just pressed together.

When fitting the seal to our valve, just unscrew the shaft from the brass head, then pick out the seal.
Push in the new seal with the larger hole facing outwards and the smooth side facing outwards,
put a tiny amount of Locktite on the threads of the shaft and screw in the shaft until it is level.
Do not over tighten
Model 78 / 79 Replacement Valve Stem / Exhaust Valve

XS 78 Exhaust Valve is pressed together so you cannot change the seal.
Ours is made to give more power and unscrews so you can change the seal.
When replacing the seal make sure you put the new seal in with the smooth side facing outwards.
The stainless steel shaft can be gripped by placing it in a vise or drill chuck, and then screw into the brass head, if it slips then gripping with a good piece of wet and dry would help.

comes in 3 parts as shown in image 

Model 78 and 79 CO2 replacement exhaust (main) valve.

Marketed in the UK as SMK / QB78 / XS78 / QB79 / XS79 etc.